Casio ID-16S - Manual

Operation Guide ID-16S
1
MA1205-EA
ILLUSTRATION
© 2012 CASIO COMPUTER CO., LTD.
1cm
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes, seconds)
Day of the week
Current temperature
Current humidity
Date (month - day) PM indicator
GENERAL GUIDE
1 1 1 1 1 ° C/ ° F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
2 2 2 2 2 SET button
Use this button when setting the current time.
3 3 3 3 3 + / – buttons
Use these buttons to change the setting that is flashing on the display.
4 4 4 4 4 RESET button
Press this button to reset the clock after replacing its batteries.
USING THE CLOCK
1. Press the SET button (2) to cycle through the setting screens as shown below.
12-hour/24-hour
Setting Screen
Time Setting Screen Month and Day
Setting Screen
Year Setting Screen
Normal Timekeeping Screen Contrast Setting Screen
2. While the screen you want is displayed, use the + and – buttons (3) to change the flashing digits.
• Holding down + or – changes the flashing
digits at high speed.
• You can set the year in the range of 2000 to
2099. The day of the week is set automatically
in accordance with the date setting.
• Pressing + or – while the Time Setting Screen
is on the display causes the seconds count to
be reset to 00.
• Each press of + or – while the 12-hour/24-hour
Setting Screen is on the display toggles
between 12-hour and 24-hour timekeeping.
• You can set the contrast level in the range of
1 to 10.
3. After making the settings you want, use the SET button (2) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.
Press – to
decrease
the flashing
digits.
Press + to
increase
the flashing
digits.