Powerplus POWLI500 FLUORECS ENT WORKLIGHT 2X18W EN - Manual

POWLI500 EN
Copyright © 2012 VARO P a g e | 1 www.varo.com
FLUORESCENT WORK LAMP 2X18W
POWLI500
1 DOMAIN OF USAGE
Outdoor or indoor usage such as jobsite, garden, studio and workshop.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your
power tool should only be passed on together with these
instructions.
2 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read the manual before using the machine
In accordance with essential applicable safety standards of European
directives
3 WARNING
 Replace ANY damaged part immediately before use.
 Never attempt to change the plug or any inside parts unless the change is made by a
professional electrician.

When one of the tubes burns out, replace it ONLY with the same specification
fluorescent tube.
4 HOW TO ASSEMBLE THE LIGHTING FIXTURE
 Take the lamp out of the color box and open the legs. Frame stand (A) has to be on a
plain surface. Never put it on a slope.

Open the lamp cover (B) by loosening the cover clips (C). Fix 2 T8 lamp tubes (E)q
and close the cover again by locking all clips tightly to the cover.
 Adjust the angle of the lamp support to your required position.
5 USING THE WORK LIGHT
 Plug the lamp into an indoor socket and switch on the lamp.
 You can plug in a working tool of (Max. 500W) in one of the sockets (D).
6 SPECIFICATION
Type POWLI500
Power 2x18W
Voltage/frequency 230 V~50Hz
Bulb type T8 fluorescent tube
Bulb life-span >8000 hours
Facade material PC