Estate ETW4400V - Manual

27"
(686 mm)
42"
(1067 mm)
25 1 / 2 "
(648 mm)
Top Load Washer
PRODUCT MODEL NUMBERS
DRAIN SYSTEM OPTIONS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice. Ref. W10200890-D-ES
06/2009
RECESSED AREA OR CLOSET INSTALLATION
For closet installation, with a door, the minimum ventilation openings in
the top and bottom of the door are required. Louvered doors with
equivalent air ventilation openings are acceptable.
ETW4100S, ETW4400V, ETW4400W
OVERALL DIMENSIONS
Wall standpipe drain system
Floor drain system
Laundry tub drain system
Floor drain system
3"
(76 mm)
3"
(76 mm)
24 in. 2
(155 cm 2 )
48 in. 2
(310 cm 2 )
19"
(483 mm)
1"
(25 mm) 0"
(0 mm)
4"
(102 mm)
14" max.
(356 mm)
Minimum diameter for a wall or floor standpipe drain: 2
"
(51 mm).
Minimum carry-away capacity: 17 gal (64L) per minute. Top of standpipe
must be at least 39
"
(991 mm) high; install no higher than 96
"
(2.4 m)
from bottom of washer. A sump pump system is required for higher
installations.
Minimum capacity: 20 gal (76 L). Top of laundry tub must be at least
39
"
(991 mm) above floor; install no higher than 96
"
(2.4 m) from
bottom of washer.
Floor drain systems require a Siphon Break Kit (Part No. 280129)
and additional drain hose (Part No. 3357090). Minimum siphon break:
28
"
(711 mm) from bottom of washer. Additional hoses might be needed.
Electrical: A 120 volt, 60 Hz., AC only,
15- or 20-amp, fused electrical supply is required.
A time-delay fuse or circuit breaker is recommended.
It is recommended that a separate circuit serving
only this appliance be provided.