Sony ILCA-99M2 - Manual (Page 332)

Menu item details
Off:
Does not display the zebra pattern.
70/75/80/85/90/95/100/100+/Custom1/Custom2:
Adjusts the brightness level.
Hint
You can register values to check the correct exposure or overexposure as well as the brightness
level for [Zebra]. The settings for correct exposure confirmation and overexposure confirmation are
registered to [Custom1] and [Custom2] respectively in the default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The
zebra pattern will appear on areas that fall within the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will
appear over areas with a brightness level equal to or higher than the value you set.
Note
The zebra pattern is not displayed during HDMI connection.
[353] List of MENU items Camera Settings2
Grid Line
Sets whether the grid line is displayed or not. The grid line will help you to adjust the
composition of images.
Menu item details
Rule of 3rds Grid:
Place main subjects close to one of the grid lines that divide the image into thirds for a well-
balanced composition.
Square Grid:
Square grids make it easier to confirm the horizontal level of your composition. This is suitable
to determine the quality of the composition when shooting landscape, close-up, or duplicated
images.
Diag. + Square Grid:
MENU
→
(Camera Settings2)
→ [Zebra] → desired setting.
1
MENU
→
(Camera Settings2)
→ [Grid Line] → desired setting.
1