Sony ILCA-99M2 - Manual (Page 94)

Self-timer(Cont.): 2 Sec. 5 Img.
Hint
Press the shutter button again or press the / (Drive Mode) button to stop the count of the self-
timer.
Press the / (Drive Mode) button and select (Single Shooting) to cancel the self-timer.
[65] Shooting Selecting a drive mode (Continuous shooting/Self-timer)
Cont. Bracket
Shoots multiple images while automatically shifting the exposure from base to darker and then
to lighter. You can select an image that suits your purpose after recording.
Menu item details
For example, the camera shoots a total of three images continuously with an exposure value
shifted by plus or minus 0.3 EV when [Cont. Bracket: 0.3EV 3 Image] is selected.
Note
The last shot is shown on the auto review.
When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by adjusting the
ISO value. If a setting other than [ISO AUTO] is selected, the exposure is changed by adjusting the
shutter speed.
/ (Drive Mode) button
→ [Cont. Bracket].
You can also set the drive mode by selecting MENU
→
(Camera Settings1)
→
[Drive Mode].
1
Select the desired mode by pressing the multi-selector right/left. 2
Adjust the focus and shoot the image.
The base exposure is set at the first shot.
Keep pressing and holding the shutter button until bracket shooting is finished.
3