Sealey LR680 User Manual
Do not exceed maximum capacity (pair) 680kg
Manufactured from strong durable yet lightweight aluminium. Provides safe and easy ramp access for a variety of small vehicles.
Suitable for loading/unloading quad bikes, ride-on lawn mowers or any other four wheeled vehicle up to a maximum of 680kg.
Features extended claws at one end to help secure ramp when in use. Folding design for compact storage when not in use.
Folded Dimensions (L x W x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . 1160 x 290 x 150mm
Extended Dimensions (L x W x H): . . . . . . . . . . . . . . . . . . . . . . . . . 2324 x 290 x 110mm
Maximum Capacity (Pair): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . .
680kg
Weight (Pair):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.5kg
WARNING! Danger of serious personal injury exists. Serious personal injury can occur when using a loading ramp.
Regularly check ramp for worn, loose, or damaged parts. If you find any of these conditions
DO NOT USE THE RAMP.
Contact your Sealey dealer for repairs. Failure to do so may cause severe injury!
The surface of the aluminium ramp may become slippery in icy or wet conditions. Caution should be used when using the
ramp.
Keep the aluminium ramp surface free of dirt and debris.
Always check the quad bike, lawn mower etc. for the manufacturer’s recommended degree of incline. Do not use ramps at a
steeper angle than recommended.
WARNING! When driving up an inclined surface, such as a ramp, there is a danger of tipping over backwards.
If the vehicle has rear-wheel drive, drive it up the ramp backwards, in reverse, so that the powered wheel is uphill.
DO NOT add to or modify any part of the aluminium ramp. Doing so will void your warranty.
DO NOT use the aluminium ramp for purposes other than those it was designed for.
Use caution when folding and unfolding your aluminium ramp. Beware of pinch points.
Be sure that the ramp is always on a solid landing and firmly placed. Always anchor your aluminium ramp in place.
Clean aluminium ramps with water and mild detergent.
WARNING! The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and
situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
DO NOT EXCEED MAXIMUM CAPACITY (PAIR) 680kg
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
LR680 Issue: 1 - 26/11/09
INSTRUCTIONS FOR:
Aluminium Loading Ramps
680kg Capacity per Pair
MODEL No: LR680
Thank you for purchasing a Sealey Jack. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give
you years of trouble free performance.
ImpORTANT: READ ThESE INSTRUCTIONS CAREFULLY. NOTE ThE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE ThIS JACK CORRECTLY AND WITh CARE FOR ThE PURPOSE FOR WhICh IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INvALIDATE ThE WARRANTY. RETAIN ThESE INSTRUCTIONS FOR
FUTURE USE.