Eaton Electrical Char-Lynn 450 Series - Manual (Page 11)

110, 230, and 450 Series Steering Control Units
11
28 Install 7 dry cap screws (and seal washers if applicable – see
figure 26) in end cap. Pretighten screws to 17 Nm [150 lb-in], then
torque screws to 25-30 Nm [225-275 lb-in] in sequence shown in
figure 27.
Eaton Corp. Hydraulics Div.
Eden Prairie, MN 55344 Char-Lynn ®
000-0000-000
000-0000-000
00/00/00
1
3
5
7
2
4 6
Resassembly
Figure 27