Livarno LDS 3 A1 - Manual

DISCO BALL LDS 3 A1
These operating instructions are a component of the Disco Ball LDS 3 A1 and give
you important information on the intended use, connection and operation of the
disco ball. Read these operating instructions carefully before using the appliance
for the fi rst time and preserve them for later reference. Pass them on, with the
appliance, to any future owner.
Intended use
This disco ball is intended exclusively for decorative purposes in a private
household. This appliance is not intended for illumination purposes, for commercial
or industrial applications or for use outdoors. This appliance is not intended
for any other use or for uses beyond those mentioned, and they could lead to
damage. The manufacturer assumes no responsibility for damage caused by
failure to observe the instructions, improper use, inappropriate repairs, making
unauthorized changes or for using unapproved replacement parts.
Safety instructions
For safe handling of the appliance observe the following safety information:
Connect the power adapter only to a correctly installed mains power socket ■
whose voltage matches that given in the technical specifi cations of the adapter.
The mains power plug must always be easily accessible, so that in the event ■
of an emergency the appliance can be quickly disconnected from the mains
power supply.
Ensure that neither the Disco Ball nor the power adapter come into contact ■
with water or other liquids. There is a risk of electric shock! Use the Disco
Ball only in a dry indoor areas, not outdoors.
Immediately disconnect the power adapter from the mains power socket if ■
the Disco Ball does not function faultlessly or there is visible damage to the
power adapter. Then arrange for the appliance to be checked by Customer
Services.
After use or during extended absences, ALWAYS remove the power adapter ■
from the mains power socket. Simply switching the appliance off is not suffi cient,
the appliance remains under power for as long as the plug is connected to
the power socket. Thus it also consumes energy.
Use only the supplied power adapter (Model: AV41-120-083 or ■
AV48-120-125), other models are possibly not suffi ciently safe or are
unsuitable for the Disco Ball.
When the Disco Ball is in use ensure that it stands completely free and will ■
not be blocked or covered by anything. This would lead to a build-up of heat.
Use only spare bulbs that correspond to the details given in the technical ■
data. More powerful bulbs could lead to the Disco Ball and the power
adapter overheating.
DO NOT place the Disco Ball under infl ammable objects, especially not ■
under decorations, curtains or drapes. This would increase the risk of fi re!
Always place the Disco Ball on a stable and level surface that cannot tip over. ■
Lay the cable from the power adapter to the Disco Ball such that no one can ■
trip over it and/or that the Disco Ball can be pulled down.
This appliance is not intended for use by individuals (including children) with ■
restricted physical, physiological or intellectual abilities or defi ciences in
experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person instruction in how the
appliance is to be used. Children should be supervised to ensure that they
do not play with the appliance.
Technical data
Power Adapter AV41-120-083 (for single Disco-Ball)
Input 230 - 240 V ~ 50 Hz, 0.1 A
Output 12 V ~ , 830 mA
Protection Class II /
Power Adapter AV48-120-125 (for double Disco-Ball)
Input 230 - 240 V ~ 50 Hz, 150 mA
Output 12 V ~ , 1250 mA
Protection Class II /
Bulb for single Disco-Ball
Socket G4 (12 V / 7 W)
Bulb for double Disco-Ball
Socket G4 (12 V / 5 W)
Items supplied
Before taking the appliance into use, check that all items are complete/available
and free of visible damage. If the contents are incomplete or are damaged
due to defective packaging or transportation, contact the Service Hotline (see
the chapter “Warranty and Service”). Remove all packaging material from the
appliance.
Disco Ball ▯
Power adapter ▯
This operating manual ▯
Operation
Insert the connection plug of the power adapter into the connection socket ▯
on the Disco Ball, then insert the plug of the power adapter into a mains
power socket.
You can switch the Disco Ball on and off using the On/Off switch.
▯
To alter the direction of rotation, simply tap the Disco Ball. ▯
Changing the bulb
CAUTION
First, disconnect the power adapter from the mains power socket and the ►
connector plug from the connector socket. This prevents a short-circuit occuring
during in the following task. If the appliance has just been in use, fi rst allow
the bulb to cool down for 10 minutes. There is a risk of being burnt!
Under no circumstances should you use a bulb with a higher performance
►
than that given in the Technical Data, as this would overload the Disco Ball.
Hold the mounting nut of the ball head fi rmly and unturn the ball anti-clock- ▯
wise from the base (see Fig 1 and Fig 2).
Pull the defective bulb out from the socket and replace it with a bulb of the
▯
same type.
Turn the ball gently back onto the ball head. When doing this, fi rmly hold
▯
the securing nut on the ball head.
Fig. 1: Bulb exchange for single Disco-Ball
Fig. 2: Bulb exchange for double Disco-Ball
Cleaning and care
CAUTION
First, disconnect the power adapter from the mains power socket and the ►
connector plug from the connector socket. Failure to do so brings with it
the risk of a potentially fatal electric shock should you come into contact
with electrical parts, or if moisture permeates the appliance.
Use a soft and lint-free cloth for cleaning. ▯
Do not use aggressive or abrasive cleansers, they could damage the plastic ▯
surfaces.
The Disco Ball is, apart from a possible changing of light bulbs, maintenance-free.
Store the Disco Ball in a dry environment.
Disposal
Do not dispose of the appliance in your normal
domestic waste. This product is subject to the provisions
of European Directive 2002/96/EC.
Dispose of the appliance through an approved disposal centre or
at your community waste disposal facility. Observe the currently
applicable regulations. In case of doubt, please contact your
waste disposal centre.
Dispose of all packaging materials in an environmentally friendly
manner.
Warranty and Service
You receive a 3-year warranty for this appliance as of the purchase date.
This appliance has been manufactured with care and meticulously examined
before delivery. Please retain your receipt as proof of purchase. In the case of
a warranty claim, please make contact by telephone with our service depart-
ment. Only in this way can a post-free despatch for your goods be assured.
The warranty is valid only for material or manufacturing defects not, however,
for transport damage, wear and tear or for damage to breakable parts, i.e.
switches or rechargeable batteries. This product is for domestic use only and is
not intended for commercial applications.
In the event of misuse and improper handling, use of force and interference not
carried out by our authorized service branch, the warranty will become void.
Your statutory rights are not restricted in any way by this warranty. The warranty
period will not be extended as a result of repairs eff ected under warranty. This
applies also to replacement and repaired parts. Damage and defects present
at the time of purchase must be reported immediately after unpacking or, at the
very least, two days after date of purchase. Repairs eff ected after expiry of the
warranty period are subject to charge.
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: [email protected]
IAN 67215
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
IAN 67215
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
ID-Nr.: LDS3A1-04/11-V2
- 1 - - 2 - - 3 - - 4 -
4
IB_67215_LDS3A1_LB4.indd 1 IB_67215_LDS3A1_LB4.indd 1 19.05.2011 13:31:39 Uhr 19.05.2011 13:31:39 Uhr