Livarno LHE 150 A1 - Manual (Page 10)

- 9 -
4. Place the handrail on the ball ring holders and
secure it with the sunken-head screws.
Fig. Securing the handrail onto the ball ring holders
Note:
By loosening the Allen screw (X) you
can adjust the ball ring holders to the incline of the
handrail.
On completion of the assembly check all screw
connections and, if needs be, tighten them down.
Cleaning and care
For normal cleaning use a cloth and water with
some mild detergent.
For stubborn soiling you should additionally use
a standard commercial cleaner for stainless steel.
Pay heed to the instruction for use given by the
manufacturer of the cleaning agent.
Disposal
Dispose of the handrail through an approved disposal
centre or at your community waste facility. Observe
the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an
environmentally friendly manner.
Importer / Service
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
Tel.: + 49 (0) 2327 / 30180
www.kompernass.com
IAN 71230