Epson Expression Home XP-342 User Manual

Page 125

Advertising
background image

4.

Check the message displayed on the screen and press the OK button.

The printer starts searching for available updates.

5.

If a message is displayed on the LCD screen informing you that a firmware update is available, follow the on-
screen instructions to start the update.

c

Important:

Do not turn off or unplug the printer until the update is complete; otherwise, the printer may malfunction.
If the firmware update is not completed or is unsuccessful, the printer does not start up normally and

"Recovery Mode" is displayed on the LCD screen the next time the printer is turned on. In this situation, you
need to update the firmware again using a computer. Connect the printer to the computer with a USB cable.
While "Recovery Mode" is displayed on the printer, you cannot update the firmware over a network
connection. On the computer, access your local Epson website, and then download the latest printer
firmware. See the instructions on the website for the next steps.

User's Guide

Network Service and Software Information

125

Advertising