Scanning in basic mode – Canon PIXMA E474 User Manual

Page 224

Advertising
background image

Scanning in Basic Mode

Use the Basic Mode tab to scan easily by following these simple on-screen steps.

To scan multiple documents at one time from the Platen, see Scanning Multiple Documents at One Time
with ScanGear (Scanner Driver).

When scanning from the ADF (Auto Document Feeder), preview is not available.

Important

• The following types of documents may not be scanned correctly. In that case, click

(Thumbnail) on

the Toolbar to switch to whole image view and scan.

• Photos with a whitish background
• Documents printed on white paper, hand-written text, business cards, and other unclear documents
• Thin documents
• Thick documents

• The following types of documents cannot be scanned correctly.

• Documents smaller than 1.2 inches (3 cm) square
• Photos that have been cut to irregular shapes

Note

• Both sides of a two sided document can be scanned simultaneously on models with ADF duplex

scanning support.

1. Place document on machine's Platen or ADF, and then start ScanGear (scanner driver).

Positioning Originals (Scanning from Computer)

Starting ScanGear (Scanner Driver)

2. Set Select Source to match your document.

224

Advertising