Canon i-SENSYS MF244dw User Manual

Page 42

Advertising
background image

4

Select [Create a new port] → select [Standard TCP/IP Port] from [Type of port] → click
[Next].

When selecting a temporary port, select [Use an existing port] → temporary port ([LPT1] etc.) → click [Next]

5

Enter the IP address of the device in [Hostname or IP address] → proceed according to
the instructions on the screen.

If the device cannot be found, it may be recognized as an unknown device. If so, click "Open details."

In Windows Vista/7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2, if the device cannot be

found, perform the following procedure.

(1) Display the device manager.

Windows Vista/Server 2008: [Control Panel] > [System and Maintenance] > [Device Manager].
Windows 7/8/8.1/Server 2008 R2/Server 2012/Server 2012 R2: [Control Panel] > [Hardware and Sound] >

[Device Manager].
Windows 10: [Settings] > [Devices] > [Printers & scanners] > [Device Manager] at the bottom of the screen.

(2) Select [Other devices] > [Unknown Device] → click the [Action] menu > [Update Driver] or [Update

Driver Software].

The driver software update wizard is displayed.

(3) Click [Browse my computer for driver software] > [Let me pick from a list of device drivers on my

computer].

(4) Select [Printers] from [Common hardware types] → click [Next].

6

In the [Add a printer] screen, click [Have Disk].

7

Click [Browse] → select the folder where the prepared inf file is stored → click [OK].

8

Select the device from [Printers] → click [Next].

9

Install the driver according to the instructions on the screen → click [Finish].

The installed device is displayed in [Devices and Printers], [Printers and Faxes], or [Printers] in the Windows

Control Panel.

In Windows 10, the installed device is displayed in [Settings] > [Devices] > [Printers & scanners] > [Printers].

Installation Without Using the Installer

39

Advertising
This manual is related to the following products: