Canon i-SENSYS MF244dw User Manual

Page 178

Advertising
background image

If an error message is displayed during setup

Press

and return to step 5.

8

Check that the Wi-Fi indicator is blinking on the operation panel.

The Wi-Fi indicator blinks when a wireless router is detected.

When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fi
indicator lights up.

Wait approximately 2 minutes until the IP address settings of the machine are completed.

Signal strength

When more than one wireless router is available for connection, the machine connects to the device with the

strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).

Reducing power consumption

You can set the machine to enter <Power Save Mode> based on signals emitted from the wireless router.

Power Save Mode (P. 287)

If the IP address of the machine has changed

In a DHCP environment, the IP address of the machine may be changed automatically. If this happens, the

connection is maintained as long as the machine and the computer belong to the same subnet.

LINKS

Connecting to a Wireless LAN(P. 169)

Network

172

Advertising
This manual is related to the following products: