Canon i-SENSYS MF244dw - Manual (Page 183)

If <Cannot find the access point.> is displayed
See When an Error Message Appears(P. 347) .
7
Select a wireless LAN router, and press .
● Select the router whose SSID matches the one that you have written down.
If your wireless router is not found
Check whether the machine is properly installed and ready to connect to the network. Installation/
Settings Problems(P. 356)
8
Enter the network key that you have written down.
● Enter the network key using the numeric keys, select <Apply>, and press .
Entering Text(P. 35)
WEP WPA-PSK or WPA2-PSK
9
Select <Yes>, and press .
If an error message is displayed during setup
Press , check whether the network key is correct, and return to step 5.
10
Check that the Wi-Fi indicator is blinking on the operation panel.
● The Wi-Fi indicator blinks when a wireless router is detected.
Network
177