Printing results are not satisfactory, Smudge marks appear on the, Edge of printouts(p. 365) – Canon i-SENSYS MF244dw User Manual
Page 371: Streaks appear on, Printouts(p. 365), Smudge marks appear on the edge of printouts, Streaks appear on printouts
Printing Results Are Not Satisfactory
1525-063
Dirt inside the machine may affect printing results. Perform care and cleaning to the machine first.
Smudge Marks Appear on the Edge of Printouts
Do you print data without margins?
●
This symptom occurs if a margin is set to none in the printer driver. A margin of 1/4" (5 mm) or less
around the edge of paper or 3/8" (10 mm) or less around the edge of envelopes is not printable with the
machine. Make sure to have margins around the document to print.
[Finishing] tab [Advanced Settings] [Expand Print Region and Print] [Off]
Streaks Appear on Printouts
Are you using appropriate paper?
●
Check usable paper, and replace with appropriate paper.
Paper(P. 419)
Loading Paper(P. 42)
●
If using the appropriate paper still does not solve the problem, change one of the <Special Printing Mode
Z>, <Special Printing Mode C>, and <Special Printing Mode D> settings.
●
To print from a computer, change the setting for [Special Print Adjustment] in the printer driver.
[Mode 1] has the least effect while [Mode 4] has the most effect. Try each in order starting with [Mode 1].
Increasing the effect makes the print density lighter. Outlines may also be blurred or images may appear
somewhat grainy.
Troubleshooting
365