Printed(p. 368), Print density is uneven(p. 368), A portion of the page is not printed – Canon i-SENSYS MF244dw User Manual

Page 374: Print density is uneven

Advertising
background image

Is the drum in the toner cartridge deteriorated?

Replace the toner cartridge with a new one.

Replacing Toner Cartridges(P. 386)

Are you printing a document with strong contrasts?

Change the setting for [Special Print Mode] using the Printer Driver.

When set to [Special Settings 2], print density is lighter compared with [Off] or [Special Settings 1]. Text and

lines may also appear faded.

A Portion of the Page Is Not Printed

Do you print data without margins?

This symptom occurs if a margin is set to none in the printer driver. A margin of 1/4" (5 mm) or less
around the edge of paper or 3/8" (10 mm) or less around the edge of envelopes is not printable with the
machine. Make sure to have margins around the document to print.

[Finishing] tab [Advanced Settings] [Expand Print Region and Print] [Off]

Print Density Is Uneven

Is the amount remaining in the toner cartridge nearly empty?

Check the amount remaining in the toner cartridge, and replace the toner cartridges as necessary.

Replacing Toner Cartridges(P. 386)

Is printing sometimes uneven when printing fine lines?

Change the setting for <Special Printing Mode J>.

Troubleshooting

368

Advertising
This manual is related to the following products: