MINOURA CS-500 - Manual

Space-Mount SM-2229
instructions manual
Universal & Adjustable Quick-Release
Type Alloy Clamping Device
MINOURA JAPAN
Made in Japan
M5
M5 thread
1 2
3
4
49 44924 332242
Prior to clamping, roughly adjust
the jaws opening to the target
diameter by turning the side screw. Wind the supplied plastic sheet
around the tube, close the jaw,
then hook the metal ring.
Close the lever.
If you hear clicking sound and you
feel appropriate resistance when
closing the lever, it's OK.
If it's too tight or too loose, the
clamp jaws may be broken or an
serious accident may occur.
Release the clamp and adjust the
opening by turning the side screw,
then try clamping again.
When closing the lever, if
retracted into the clamp body,
clamping must be loose and it
will cause serious trouble while
completely retracted.
MINOURA JAPAN
1197-1 Godo, Anpachi, Gifu
503-2305 Japan
[email protected]