Thermo Pride Air Handlers ECM Blower 13/14 SEER (AH2) User Manual
13 & 14 seer air handler, Installation & service manual
Advertising
MAC-202
ECN 5320-MA 130307
13 & 14 SEER
AIR HANDLER
INSTALLATION & SERVICE MANUAL
MODELS: AH2436AE1, AH4260AE1,
AH2436BE1, AH4260BE1
PLEASE READ THESE INSTRUCTIONS PRIOR TO INSTALLATION AND BEFORE
PERFORMING ANY SERVICE OR MAINTENANCE. THESE INSTRUCTIONS MUST
BE LEFT WITH THE USER AND SHOULD BE RETAINED FOR FUTURE
REFERENCE BY QUALIFIED SERVICE PERSONNEL.
: Improper installation, adjustment, alteration, service, or maintenance can
cause injury or property damage. Refer to this manual. For assistance or additional
information consult a qualified installer, service agency, or manufacturer listed below.
THERMO PRODUCTS, LLC.
BOX 217
NORTH JUDSON, IN 46366
PHONE: (574) 896-2133
MADE IN USA
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- TABLE OF CONTENTS
- Figure A.
- Figure C
- Figure D
- Figure G
- Figure H
- Table C1 COOLING SWITCH SETTINGS
- BLOWER HEATING SPEEDS WITH HYDRONIC COIL
- In the next two pages:
- 1. Locate the page that refers to the Air Handler to be set up.
- 2. Find the line(s) on the chart that best represents the water temperature and gallons per minute available.
- 3. Find the point along the curve that best fits the BTU and Supply Air temperature desired.
- 4. Read the letter associated with that point and use it to find the switch settings in the table below the chart.
- (The table below the switch settings represent the actual numbers represented by the chart.) HYDRONIC COIL MODEL HC1-B
- HYDRONIC COIL MODEL HC2-A
- BLOWER TIME DELAY
- Table D1: Delays before blower cycles “ON or “OFF”
- 4
- ON
- ON
- ON
- ON
- 8
- ON
- ON
- Figure I.
- Mac-202 printing specifications.pdf
- Individual page specifications: