SAF-HOLLAND XL-LG305 Mark V Landing Gear - Manual

XL-LG305 1
LANDING
GEAR
Mark V Landing Gear
OPERATING and
MAINTENANCE PROCEDURES
HITCH
Before attempting to operate the landing gear, you must read and understand
the following procedures:
RETRACT
TRAILER
CLOCKWISE
HIGH
COUNTER CLOCKWISE
OUTSIDE MOUNT
EXTEND
LOW
OPERATING INSTRUCTIONS
Before operating, identify the mounting style of your landing gear — Inside or Outside Mount
(See figures below).
• Push crank handle in for low speed.
• Pull crank handle out for high speed.
• Turn crank:
counterclockwise = retract
clockwise = extend
TRAILER
CLOCKWISE
LOW
COUNTER CLOCKWISE
HIGH
RETRACT
INSIDE MOUNT
EXTEND
Figure 1
• Push crank handle in for high speed.
• Pull crank handle out for low speed.
• Turn crank:
counterclockwise = extend
clockwise = retract
CAUTION
• Perform all procedures in a lighted area clear of
obstacles and other personnel.
• Always grip the crank handle securely with both
hands.
• Maintain proper footing at all times.
• Never attempt to shift the landing gear while
under load.
• Lifting and lowering of the trailer must always
be done in LOW GEAR.
• DO NOT ATTEMPT TO LIFT OR LOWER
TRAILER WITH LANDING GEAR IN HIGH
GEAR, AS SERIOUS PERSONAL INJURY
COULD OCCUR.
• Always secure the crank handle when not in use.