EMC QLogic User Manual
EMC Hardware
Advertising
Table of contents
Document Outline
- Preface
- Introduction
- Installing and Configuring the HBA Driver
- Configuring an EMC Boot Device
- Introduction
- Configuring a Symmetrix Boot Device
- Configuring a CLARiiON Boot Device
- Procedure Flowchart
- Requirements
- Preparing the Storage System
- Setting Up the HBA BIOS
- Preparing the Fabric
- Preparing the Server
- Configuring the HBA Boot BIOS
- Installing Windows
- Verifying HBA Driver and Digital Signature Installation
- Assigning a Permanent Boot Drive Letter for Windows NT
- Installing Multipath and Failover Software
- Installing Additional Navisphere Host Agent Software
- Configuring Additional Boot Port Name Entries in the Boot BIOS
- Starting a Fresh Installation
- Boot Time and LUN Availability
- Replacing a Boot HBA
- How a Server Responds to Failure in the Boot LUN Path
- Known Issues
- Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
- Installing the HBA Driver
- Windows 2003 STORPort Updates
- Updating the HBA Driver in a Windows 2000 or Windows 2003 Host
- Using the QLogic iSCSI SANSurfer Application to Configure iSCSI Devices
- Configuring iSNS settings for QLA4010
- Installing and Configuring the QLA4010 iSCSI HBA to boot from an EMC Storage Array
- Third-Party Software
- Troubleshooting
- Index