Yamaha CVP-705B User Manual

Page 36

Advertising
background image

Calling Up Registration Memory Numbers in Order (Registration Sequence)

CVP-709/CVP-705 Reference Manual

36

5

Program a Sequence order in which the Registration Memory number is to be called up.

Basically, press the desired Registration Memory number button on the panel, then touch [Insert] to enter the
selected number.

6

Select the action that will result when the Registration Sequence reaches the end.

Stop:

Pressing the ASSIGNABLE button or the “advance” pedal has no effect. The sequence is “stopped.”

Top:

The sequence starts again at the beginning.

Next:

The sequence automatically moves to the beginning of the next Registration Memory Bank in the same

folder.

7

Set the Registration Sequence to “On.”

The Registration Sequence programmed here is shown in the Registration area of the Home display. Press the pedal
or the ASSIGNABLE button to check whether or not the Registration Memory number is called up in the order as
programmed.

8

Touch

(Save) to call up the File Selection display, then save the sequence program as a

Registration Memory Bank file.

NOTICE

Settings in the Registration Sequence display will be lost if you select another Registration Bank without
executing the Save operation.

,

,

, I

Moves the cursor.

NOTE

If you want to move the cursor directly to an already entered number, touch the desired
number.

Replace

Replaces the number of the cursor location with the currently selected Registration
Memory number.

Insert

Inserts the number of the currently selected Registration Memory number before the
cursor position.

Delete

Deletes the number at the cursor position.

Clear

Deletes all numbers in the sequence.

Advertising
This manual is related to the following products: