Yamaha CVP-705B User Manual

Page 53

Advertising
background image

Creating/Editing Styles (Style Creator)

CVP-709/CVP-705 Reference Manual

53

2

If necessary, select a Voice then practice the bass line, chord backing, or phrase to be
recorded.

Touch the instrument icon (illustration) to call up the Voice Selection display then select the desired Voice. After
selecting, touch [Close] to return to the original display. With the selected Voice, practice the phrase or chord
backing to be recorded.

Record a phrase in CM7 which will play appropriate notes as change chords during

performance

Rules when recording a Main or Fill-in

With the default initial settings, the Source Root/Chord is set to CM7. This means that you should record a Source
Pattern which is to be triggered by specifying CM7 during normal performance. Record a bass line, phrase or chord
backing which you want to hear when CM7 is specified. Specifically, see the rules below.
• Use only the CM7 scale tones when recording the Bass and Phrase channels (i.e., C, D, E, G, A, and B).
• Use only the chord tones when recording the Chord and Pad channels (i.e., C, E, G, and B).

If you observe these rules, Style playback notes are appropriately converted depending on the chord changes you
make during your performance.

Rules when recording an Intro or Ending

These Sections are designed assuming that the chord is not changed during playback. This is why you need not
observe the rules for Main and Fill-In Sections described above, and you can make the chord progression in
recording. However, follow the rules below since the Source Root/Chord is set to CM7 by default.
• When recording the Intro, make sure that the recorded phrase leads properly into a C scale.
• When recording the Ending, make sure that the recorded phrase begins with or properly follows a C scale.

Setting the Source Root/Chord if necessary

Although the default Source Root/Chord is set to CM7 as described above, you can change this to any desired one in
which you can play easily. Call up the “SFF Edit” display, set the Source Root and Chord to the favorite or desired
Root and Chord type. Keep in mind that when you change the Source Chord from the default CM7 to another
chord, the chord notes and recommended notes will also change. For details, refer to

page 58

.

3

Press the STYLE CONTROL [

/

](START/STOP) button to start recording.

With the already recorded data playing back, turn each channel on or off by touching as desired.
If necessary, delete a channel by touching [Delete] located under the desired channel.

4

As soon as loop playback returns to the first beat in the first measure, start playing the bass
line, chord backing or phrase to be recorded.

5

Press the [

/

](START/STOP) button to stop playback.

If you want to add more notes, press the [

/

](START/STOP) button again to continue recording.

To hear the playback sound of the already recorded channels with another Source Chord/

Root:

1) Call up the “SFF Edit” display, then set the “Target Ch” at the top of the display to “Rhythm1” or “Rhythm2.”
2) Touch [Play Root/Chord] to call up the operation display.
3) Press the STYLE CONTROL [

/

](START/STOP) button to start playback.

4) On the display, set the “Play Root/Chord” to the desired Chord root and Chord type.

This operation lets you hear how the Source Pattern is played back via chord changes during normal
performance.

6

Touch and hold the Recording channel for a while (until the button changes color) to exit
from the Recording mode.

Available Voices for recording

Any except for the Organ Flutes/Drum kit/SFX kit Voices can be used for recording.

C R C C R C

C = Chord note
C, R = Recommended note

Advertising
This manual is related to the following products: