Yamaha CVP-705B - Manual (Page 99)

Making Global Settings (Utility)
CVP-709/CVP-705 Reference Manual
99
Factory Reset — Restoring the Factory Programmed Settings
On page 1/2, checkmark the boxes of the desired parameters then touch [Factory Reset] to initialize the settings of the
parameters which are checkmarked.
Backup/Restore – Saving and Recalling Your Original Settings as a Single File –
For the items below, you can save your original settings to the internal User memory or USB flash drive as a single file for
future recall.
1
Make all desired settings on the instrument, then call up page 2/2 of the “Factory Reset/
Backup” display.
2
Touch [Backup] of the desired item.
If you want to save the backup file to the USB flash drive, make sure to connect the USB flash drive to the
instrument. When you select “All,” the backup file can only be saved to the USB flash drive.
Factory Reset/Backup
System Restores the System Setup parameters to the original factory settings. Refer to “Parameter Chart”
in the Data List for details about which parameters belong to the System Setup.
MIDI Restores the MIDI settings including the MIDI templates saved in the internal User memory to
the original factory status.
User Effect Restores the User Effect settings including the following data to the original factory settings.
• User Effect types (
page 14 )
• User Master EQ types ( page 12 )
• User Master Compressor types ( page 16 )
• User Vocal Harmony types ( page 31 )
• User Microphone Settings ( page 26 )
Registration Turns off all the REGISTRATION MEMORY [1] – [8] lamps, indicating that no Registration
Memory Bank is selected although all the Bank files are maintained. In this status, you can create
Registration Memory setups from the current panel settings.
Music Finder Restores the Music Finder data (all records) to the original factory settings.
Files&Folders Deletes all files and folders saved in the internal User memory and resets the User memory to the
default status. This also deletes the registration to the Favorite () tab on the Voice or Style
Selection display.
All All settings and data in the User memory of this instrument (except for protected Song) are
handled as a single bulk file named “CVP-709.bup” or “CVP-705.bup.” Because just by
touching [Backup] of “All” will save the file to the root directory of the USB flash drive, step
3 is not necessary.
System Parameters set on the various displays such as “Utility” are handled as a single System Setup
file. Refer to “Parameter Chart” in the Data List for details on which parameters belong to
System Setup.
MIDI The MIDI settings including the MIDI templates on the internal User memory are handled
as a single MIDI Setup file.