Updating the firmware, Updating with a “musiccast controller, Updating with the unit – Yamaha ISX-18 User Manual

Page 34

Advertising
background image

30

Updating the firmware

When new firmware is detected from the network, “UP” will be shown on the front panel display (press any button to turn off the “UP” indication on the front panel display).
There are two ways to updating the firmware.

Updating with a “MusicCast CONTROLLER”

You can use “MusicCast CONTROLLER” to update the firmware. Follow the indication of “MusicCast CONTROLLER” to update
the firmware.

Updating with the unit

1

Press

A

(power)/CONNECT to turn

the unit off.

2

Pull out the plug from the wall outlet.

3

While pressing PRESET, plug the
power cable into the wall outlet.

The “UP” indications flash on the unit.

4

Press PRESET.

The unit starts updating the firmware. When

finished, the display flashes as shown in the figure.

5

Press

A

(power)/CONNECT to check

that the normal display is returned.

A (power)/CONNECT

PRESET

Do not operate the unit or disconnect the power

cable while updating.

When Internet speed is not fast enough, network

update may not be possible depending on the
condition of the wireless connection. If the
firmware update fails, the “Er” indication flashes. In
that case, try updating again after a while.

Advertising