Deactivating the demonstration, Inserting batteries, Carrying the system – Sony MHC-V11 User Manual

Page 13: Deactivating the

Advertising
background image

13

GB

Ge
tting S

tar

te

d

MHC-V11.4-582-493-21(1)

• Avoid the following kinds of locations.

Between buildings

Nearby mobile phones,

electrical appliances

On steel desks or tables

• Keep the antenna away from the AC

power cord and the USB cable to avoid

picking up noise.

Power

Connect the AC power cord (supplied)

to the system, and then to the wall

outlet.

When the AC power cord is connected,

the demonstration (page 14) starts

automatically. If you press

 to turn

on the system, the demonstration

ends.

Deactivating the
demonstration

To deactivate the demonstration

while the system is turned off, press

SPEAKER LIGHT repeatedly to select

Standby Mode (page 14).

Inserting batteries

Insert two R03 (size AAA) batteries

(supplied), matching the polarities

shown below.

Notes

• Do not mix an old battery with a new one

or mix different types of batteries.

• If you do not use the remote control for a

long period of time, remove the batteries

to avoid damage from battery leakage

and corrosion.

Carrying the system

Before carrying the system, make

sure that there is no disc loaded and

no USB device is connected, and

disconnect all the cords.

Note

Correct hand placement while carrying the

system is very important to avoid personal

injury and/or property damage.

Advertising