Setting the bluetooth standby mode, Turning on or off the bluetooth signal, Setting the bluetooth – Sony MHC-V11 User Manual

Page 25: Standby mode turning on or off the, Bluetooth signal

Advertising
background image

25

GB

BL

UET
OO
TH

MHC-V11.4-582-493-21(1)

LDAC is an audio coding

technology developed by Sony,

that enables the transmission

of High-Resolution (Hi-Res)

Audio content, even over a

BLUETOOTH connection. Unlike

other BLUETOOTH compatible

coding technologies, such as

SBC, it operates without any

down-conversion of the Hi-Res

Audio content

1)

. It also allows

approximately three times more

data

2)

than the other technologies,

for transmitting over a

BLUETOOTH wireless network with

unprecedented sound quality using

efficient coding and optimized data

bundling.

1)

Excluding DSD format contents.

2)

In comparison with SBC (Sub Band

Codec), when the bit rate of 990 kbps

(96/48 kHz) or 909 kbps (88.2/44.1 kHz)

is selected.

Setting the BLUETOOTH
standby mode

The BLUETOOTH standby mode

enables the system to turn on

automatically when you establish

the BLUETOOTH connection with a

BLUETOOTH device.

1

Press OPTIONS.

2

Press / repeatedly to select
“BT:STBY,” then press .

3

Press / repeatedly to select
the setting, then press .

• ON: The system turns on

automatically even when the

system is in standby mode.

• OFF: Turns off this function.

Hint

Disable the BLUETOOTH standby mode to

reduce the power consumption in standby

mode (eco mode).

Turning on or off the
BLUETOOTH signal

You can connect to the system

from a paired BLUETOOTH device

in all functions when the system’s

BLUETOOTH signal is set to on. The

BLUETOOTH signal is turned on by

default.
Use the buttons on the unit to perform

this operation.

Hold down

and TUNING– for

about 5 seconds.

“BT ON” or “BT OFF” appears on the

display.

Note

You cannot perform the following

operations when you turn off the

BLUETOOTH signal:

— Pairing and/or connecting with

BLUETOOTH device

— Setting the BLUETOOTH audio codecs

— Setting the BLUETOOTH standby mode

— Using “SongPal” via BLUETOOTH

Advertising