Sony MHC-V11 - Manual (Page 30)

30
GB
MHC-V11.4-582-493-21(1)
Enjoying the Party Chain
1
Plug in the AC power cord
and turn on all the systems.
2
Adjust the volume on each
system.
3
Activate the Party Chain
function on the system to be
used as the Party Host.
Example: When using this system
as the Party Host
 Press FUNCTION repeatedly to
select the function you want.
When you connect using 
(page 28), do not select the
Audio In function. If you select
this function, the Party Chain
function cannot be activated.
 Start playback, then hold down
MEGA BASS on the unit until
“PARTY CHAIN HOST” appears
on the display.
The Party Host starts the
Party Chain, and other
systems become Party Guests
automatically. All systems play
the same music as that being
played by the Party Host.
Notes
• Depending on the total unit of systems
you have connected, Party Guests may
take some time to start playing the music.
• Changing the volume level and sound
effect on the Party Host will not affect the
output on the Party Guests.
• When you use the microphone on Party
Host, the sound will not be output from
Party Guests.
• When one of the systems in the chain
is performing USB transfer, wait for the
system to complete or stop the transfer
before you activate the Party Chain
function.
• For detailed operation on other systems,
refer to the operating instructions of the
systems.
To select a new Party Host
Repeat step 3 of “Enjoying the Party
Chain” on the system to be used as a
new Party Host. The current Party Host
becomes Party Guest automatically. All
systems play the same music as that
being played by the new Party Host.
Notes
• You can select another system as the
new Party Host only after the Party Chain
function of all the systems in the chain
has been activated.
• If the selected system does not become a
new Party Host after a few seconds, repeat
step 3 of “Enjoying the Party Chain.”
To deactivate the Party Chain
When using this system as the Party
Host, hold down MEGA BASS on the
unit.
When using another system as the
Party Host, press PARTY CHAIN on the
Party Host.
Note
If the Party Chain function is not deactivated
after a few seconds, perform the above
operation on the Party Host again.
Singing along: Karaoke
Preparing for Karaoke
1
Turn MIC LEVEL on the
unit to MIN to reduce the
microphone volume level.
Microphone volume range
2
Connect an optional
microphone to MIC 1 or MIC 2
jack on the unit.
Connect another optional
microphone if you want to sing in
duet.