LG AN-MR600 - Manual (Page 3)

3 BATTERY
BATTERY
1. Installing Batteries
* Please read this manual carefully.
* Press the top of the battery cover, slide it back, and lift the
cover as shown below.
* To replace batteries, open the battery cover, replace alkaline
batteries (1.5 V, AA) matching and ends to the label
inside the compartment, and close the battery cover. Be sure
to point the remote control at the remote control sensor on
the TV.
* To remove the batteries, perform the installation actions
in reverse. Don’t mix old or used batteries with new ones.
Close the cover securely.
* Open the battery cover to find the label.
2. Precautions
* After replacement of the battery, use the remote control following pairing in accordance with user
manual.
* If the unit does not operate after replacement of battery, reattempt pairing in accordance with the
user manual.
* If the remote controller is not being used for prolonged period of time, remove the battery from the
unit.
* Do not dismantle or exert heat to the battery.
* Do not drop battery or exert extreme impact that may even cause the case to be damaged.
* Do not immerse the battery in water.
* There is danger of explosion if a the battery is inserted incorrectly.
* Properly dispose of used batteries