Check the authentication code – Nikon Coolpix A300 User Manual

Page 17

Advertising
background image

7

Getting Started

3

Pair (i.e., establish a Bluetooth link between) the camera and the
smart device.

• Android Devices with NFC Support

After checking that NFC is enabled on the smart
device, touch the camera

Y (N-Mark) to the NFC

antenna on the smart device to launch the
SnapBridge app.
- If the SnapBridge download site is displayed,

download and install the app before repeating
the above steps.

• iOS Devices and Android Devices Without

NFC Support
Press the camera

k button. The camera will wait

for a connection; launch the SnapBridge app on
the smart device and follow the on-screen
instructions to tap the name of the camera you
want to pair with.

4

Check the authentication code.

After confirming that the camera and smart device

display the same six-digit authentication code,
follow the steps below to complete pairing (note
that the code may not be displayed in some
versions of iOS, but you should follow the steps
below even if the code is not displayed).
- On the camera, press

k.

- On the smart device, tap Pairing (the name of

the button varies with the smart device).

On your smart device, go to the app
store and search for SnapBridge. After
installing, open the SnapBridge app.

Cancel

Camera

App

Connect to Camera

Camera name

OK

Cancel

Cancel

Confirm that the same authentication
code is displayed on the smart device
and press OK.

Auth. code

Camera

Advertising