Nikon D7200 body User Manual
Page 194
170
A
HDMI
To use live view when the camera is connected to an HDMI-CEC device,
select Off for HDMI > Device control in the setup menu (
A
Wireless Remote Controllers and Remote Cords
If Record movies is selected for Custom Setting g4 (Assign shutter
button,
0 288) and the live view selector is rotated to 1, the shutter-
release buttons on optional wireless remote controllers (
and remote cords (
0 319) can be used to start live view and to start
and end movie recording.
D
Recording Movies
Movies are recorded in the sRGB color space. Flicker, banding, or
distortion may be visible in the monitor and in the final movie under
fluorescent, mercury vapor, or sodium lamps or with subjects that are
in motion, particularly if the camera is panned horizontally or an object
moves horizontally at high speed through frame (for information on
reducing flicker and banding, see Flicker reduction,
0 290). Jagged
edges, color fringing, moiré, and bright spots may also appear. Bright
regions or bands may appear in some areas of the frame with flashing
signs and other intermittent light sources or if the subject is briefly
illuminated by a strobe or other bright, momentary light source. Avoid
pointing the camera at the sun or other strong light sources. Failure to
observe this precaution could result in damage to the camera’s internal
circuitry.
Flash lighting can not be used.
Recording ends automatically if the mode dial is rotated.