Non-cpu lenses – Nikon D7200 body User Manual

Page 248

Advertising
background image

224

Non-CPU lenses can be used in modes A and M, with aperture set
using the lens aperture ring. By specifying lens data (lens focal
length and maximum aperture), the user can gain access to the
following CPU lens functions.

If the focal length of the lens is known:
Power zoom can be used with optional flash units
Lens focal length is listed (with an asterisk) in the playback

photo info display

If the maximum aperture of the lens is known:
The aperture value is displayed in the control panel and

viewfinder

Flash level is adjusted for changes in aperture if the flash unit

supports AA (auto aperture) mode

Aperture is listed (with an asterisk) in the playback photo info

display

Specifying both the focal length and maximum aperture of the lens:
Enables color matrix metering (note that it may be necessary to

use center-weighted or spot metering to achieve accurate
results with some lenses, including Reflex-NIKKOR lenses)

Improves the precision of center-weighted and spot metering

and i-TTL balanced fill-flash for digital SLR

Non-CPU Lenses

A

Teleconverters and Zoom Lenses

The maximum aperture for teleconverters is the combined maximum
aperture of the teleconverter and the lens. Note that lens data are not
adjusted when non-CPU lenses are zoomed in or out. The data for
different focal lengths can be entered as separate lens numbers, or the
data for the lens can be edited to reflect the new values for lens focal
length and maximum aperture each time zoom is adjusted.

Advertising