Nikon D7200 body - Manual (Page 304)

280
d Shooting/display
d1 Beep
Volume
Choose the pitch and volume of the
beep.
Pitch
d2 Continuous low-speed (defaults to 3 fps)
6 fps Choose the maximum frame advance
rate in C
L
mode (note that the frame
advance rate in live view will not exceed
3.7 fps even when values of 4 fps or
faster are selected).
5 fps
4 fps
3 fps
2 fps
1 fps
d3 Max. continuous release
(defaults to 100)
1–100 Choose the maximum number of shots
that can be taken in a single burst in
continuous release mode.
d4 Exposure delay mode (defaults to Off)
3 s In situations where the slightest camera
movement can blur pictures, select 1 s,
2 s, or 3 s to delay shutter release until
approximately one, two, or three
seconds after the mirror is raised.
2 s
1 s
Off
d5 Flash warning (defaults to On)
On If On is selected, the flash-ready
indicator (
M) will blink if the flash is
required to ensure optimal exposure.
Off
d6 File number sequence (defaults to On)
On Choose how the camera assigns file
numbers.
Off
Reset
d7 Viewfinder grid display
(defaults to Off)
On Choose whether to display a framing
grid in the viewfinder.
Off