Nikon D7200 body - Manual (Page 353)

329
Cleaning : When cleaning the camera body, use a blower to gently remove
dust and lint, then wipe gently with a soft, dry cloth. After using the
camera at the beach or seaside, wipe off any sand or salt using a cloth
lightly dampened in pure water and then dry the camera thoroughly. In
rare instances, static electricity may cause LCDs to light up or go dark.
This does not indicate a malfunction, and the display will soon return to
normal.
The lens and mirror are easily damaged. Dust and lint should be gently
removed with a blower. When using an aerosol blower, keep the can
vertical to prevent discharge of liquid. To remove fingerprints and other
stains from the lens, apply a small amount of lens cleaner to a soft cloth
and wipe the lens carefully.
See “Image Sensor Cleaning” ( 0 321, 324) for information on cleaning
the image sensor.
Lens contacts : Keep the lens contacts clean.
Do not touch the shutter curtain : The shutter curtain is extremely thin and
easily damaged. Under no circumstances should you exert pressure on
the curtain, poke it with cleaning tools, or subject it to powerful air
currents from a blower. These actions could scratch, deform, or tear the
curtain.
Storage : To prevent mold or mildew, store the camera in a dry, well-
ventilated area. If you are using an AC adapter, unplug the adapter to
prevent fire. If the product will not be used for an extended period,
remove the battery to prevent leakage and store the camera in a plastic
bag containing a desiccant. Do not, however, store the camera case in a
plastic bag, as this may cause the material to deteriorate. Note that
desiccant gradually loses its capacity to absorb moisture and should be
replaced at regular intervals.
To prevent mold or mildew, take the camera out of storage at least once
a month. Turn the camera on and release the shutter a few times before
putting it away.
Store the battery in a cool, dry place. Replace the terminal cover before
putting the battery away.