Nikon D7200 body - Manual (Page 51)

27
❚❚ Number of Exposures Remaining
The camera has two memory card slots:
slot 1 and slot 2. Slot 1 is for the main
card; the card in slot 2 plays a backup or
secondary role. If the default setting of
Overflow is selected for Role played by
card in Slot 2 (
0 82) when two memory
cards are inserted, the card in slot 2 will
only be used when the card in slot 1 is
full.
The control panel shows the slot or slots
that currently hold a memory card (the
example at right shows the icons
displayed when a card is inserted in each
slot). If the memory card is full or locked
or an error has occurred, the icon for the
affected card will flash (
0 344).
The control panel and viewfinder show
the number of photographs that can be
taken at current settings (values over
1000 are rounded down to the nearest
hundred; e.g., values between 1800 and
1899 are shown as 1.8 k). If two memory
cards are inserted, the displays show the
space available on the card in Slot 1.
Slot 1
Slot 2
Control panel
Number of exposures
remaining
Control panel
Viewfinder