Nikon D5 - Manual (Page 98)

98
If Restart standby timer is selected, operating the multi selector
when the standby timer expires will activate the meters and start
the standby timer. If Do nothing is selected, the timer will not start
when the multi selector is pressed.
Selecting Yes allows adjustments that are normally made by
holding the
E, S (Q), I, BKT, Y, W (M), S, T, U, or AF-
mode button and rotating a command dial to be made by rotating
the command dial after the button is released. This also applies to
controls to which Active D-Lighting has been assigned as a “press +
command dial” option for Custom Setting f1 (Custom control
assignment,
0 90). Setting ends when any of the affected
buttons is pressed again, the shutter-release button is pressed
halfway, or the standby timer expires.
If ( W) is selected, the exposure indicators in the
top control panel and information display are displayed with
negative values on the left and positive values on the right. Select
( V) to display positive values on the left and
negative values on the right.
Select Disable to disable the a button, preventing live view from
starting accidentally. If Enable (standby timer active) is selected,
the
a button can only be used to start live view while the standby
timer is active.
f5: Multi Selector
G button
➜ A Custom Settings menu
f6: Release Button to Use Dial
G button
➜ A Custom Settings menu
f7: Reverse Indicators
G button
➜ A Custom Settings menu
f8: Live View Button Options
G button
➜ A Custom Settings menu