Nikon D5 - Manual (Page 368)

346
n
❚❚ “Clean at Startup/Shutdown”
Choose from the following options:
1
Select Clean at startup/shutdown.
Display the Clean image sensor menu as
described on page 345. Highlight Clean
at startup/shutdown and press
2.
2
Select an option.
Highlight an option and press J.
Option Description
5
Clean at startup
The image sensor is automatically cleaned each time
the camera is turned on.
6
Clean at
shutdown The image sensor is automatically cleaned during
shutdown each time the camera is turned off.
7
Clean at startup
& shutdown The image sensor is cleaned automatically at startup
and at shutdown.
Cleaning off Automatic image sensor cleaning off.
D
Image Sensor Cleaning
Using camera controls during startup interrupts image sensor cleaning.
Cleaning is performed by vibrating the low-pass filter. If dust can not be
fully removed using the options in the Clean image sensor menu, clean
the image sensor manually or consult a Nikon-authorized service
representative.
If image sensor cleaning is performed several times in succession, image
sensor cleaning may be temporarily disabled to protect the camera’s
internal circuitry. Cleaning can be performed again after a short wait.