Ending multiple exposures – Nikon D500 User Manual

Page 267

Advertising
background image

241

❚❚ Ending Multiple Exposures

To end a multiple exposure before the
specified number of exposures have
been taken, select Off for multiple
exposure mode. If shooting ends before
the specified number of exposures have
been taken, a multiple exposure will be
created from the exposures that have
been recorded to that point. If Average is selected for Overlay
mode
, gain will be adjusted to reflect the number of exposures
actually recorded. Note that shooting will end automatically if:
A two-button reset is performed (

0 230)

The camera is turned off
The battery is exhausted
Pictures are deleted

D

Multiple Exposure

Multiple exposures may be affected by noise (randomly-spaced bright
pixels, fog, or lines).

Do not remove or replace the memory card while recording a multiple
exposure.

Live view is not available while shooting is in progress. Selecting live
view resets Multiple exposure mode to Off.

The shooting information listed in the playback photo information
display (including metering, exposure, exposure mode, focal length,
date of recording and camera orientation) is for the first shot in the
multiple exposure.

Advertising
This manual is related to the following products: