Nikon D500 User Manual

Page 356

Advertising
background image

330

1 Not available with spot metering.
2 Can also be selected with flash unit.
3

qA/A mode selection performed on flash unit using custom settings. Unless lens data have
been provided using the

Non-CPU lens data option in the setup menu, “A” will be

selected when a non-CPU lens is used.

4 Unless lens data have been provided using the

Non-CPU lens data option in the setup

menu, non-TTL auto will be selected when a non-CPU lens is used.

5 Can only be selected with camera.
6 Available only during close-up photography.
7 Unless lens data have been provided using the

Non-CPU lens data option in the setup

menu, non-TTL auto (A) is used with non-CPU lenses, regardless of mode selected with flash
unit.

8 Choice of

qA and A depends on the option selected with master flash.

9 Supports the same features as remote flash units with optical AWL.
10 Available only in i-TTL,

qA, A, GN, and M flash-control modes.

11 Available only in i-TTL flash control mode or when flash is set to emit monitor pre-flashes in

qA or A flash control mode.

12 Available only in commander mode.
13 Firmware updates for the SB-910 and SB-900 can be performed from the camera.

Auto FP High-Speed Sync

10

✔ ✔ ✔ ✔ ✔ — —

FV lock

11

✔ ✔ ✔ ✔ ✔ ✔ ✔

AF-assist for multi-area AF

✔ ✔ — ✔

12

Red-eye reduction

✔ ✔ ✔ — — ✔ —

Camera modeling illumination

✔ ✔ ✔ ✔ ✔ — —

Unified flash control

✔ — — ✔ ✔

Camera flash unit firmware update

✔ ✔

13

✔ — ✔ — — — ✔

SB-5

000

SB

-910, S

B

-900,

SB

-800

SB

-700

SB

-600

SB

-500

SU

-800

SB-R

200

SB

-400

SB

-300

Advertising
This manual is related to the following products: