Nikon D500 - Manual (Page 409)

383
A
Supplied Accessories for AF-S DX NIKKOR 16–80mm f/2.8–4E ED VR Lenses
• 72 mm Snap-on Front Lens Cap LC-72
• Rear Lens Cap LF-4
• Bayonet Hood HB-75
Align the lens hood mounting mark (
●) with the lens hood alignment
mark ( ) as shown in Figure q and then rotate the hood (w) until
the
● mark is aligned with the lens hood lock mark (—).
When attaching or removing the hood, hold it near the symbol on its
base and avoid gripping it too tightly. Vignetting may occur if the
hood is not correctly attached. The hood can be reversed and
mounted on the lens when not in use.
To detach the lens hood, press the lens hood lock release button (q),
rotate the hood in the direction shown by the arrow (w), and remove
it as shown (e).