Using wps-compatible access points, Follow steps 5 – 8 in “using wps, Compatible access points” (= 121) to – Canon PowerShot SX720 HS User Manual

Page 121

Advertising
background image

121

Before Use

Basic Guide

Advanced Guide

Index

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

3

Choose [ ].

Press the [ ][ ][ ][ ] buttons or turn

the [ ] dial to choose [ ], and then

press the [ ] button.

4

Choose [Add a Device].

Press the [ ][ ] buttons or turn the [ ]

dial to choose [Add a Device], and then

press the [ ] button.

5

Choose [WPS Connection].

Press the [ ][ ] buttons or turn the [ ]

dial to choose [WPS Connection], and

then press the [ ] button.

6

Choose [PBC Method].

Press the [ ][ ] buttons or turn the [ ]

dial to choose [PBC Method], and then

press the [ ] button.

7

Establish the connection.

On the access point, hold down the WPS

connection button for a few seconds.

For information on WPS compatibility and for instructions on
checking settings, refer to the access point user manual.

A router is a device that creates a network (LAN) structure for
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.

This guide refers to all Wi-Fi routers and base stations as
“access points”.

If you use MAC address filtering on your Wi-Fi network, be
sure to add the camera’s MAC address to your access point.
You can check your camera’s MAC address by choosing MENU
(= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Check MAC Address].

Using WPS-Compatible Access Points

WPS makes it easy to complete settings when connecting devices over

Wi-Fi. You can use either Push Button Configuration Method or PIN

Method for settings on a WPS supported device.

1

Confirm that the computer is

connected to an access point.

For instructions on checking the

connection, refer to the device and

access point user manuals.

2

Access the Wi-Fi menu.

Press the [ ] button.

If the [Device Nickname] screen is

displayed, press the [ ][ ] buttons or

turn the [ ] dial to choose [OK], and then

press the [ ] button.

Advertising
This manual is related to the following products: