Canon PowerShot SX720 HS - Manual (Page 130)

130
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
(= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can also send multiple images at once and change the image
size before sending (= 131).
● You can send the current image by choosing [Send this image] on
the screen in step 4.
4
Send images.
● Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [Select and send],
and then press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ]
dial and select [Select], and then press
the [ ] button.
● Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose an image to
send, press the [ ] button to mark it
as selected ([ ]), and then press the
[ ] button.
● Press the [ ][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
● Press the [ ][ ][ ][ ] buttons or turn
the [ ] dial to choose [Send], and then
press the [ ] button.
● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
● To end the connection, press the
[ ] button, choose [OK] on the
confirmation screen (either press the
[ ][ ] buttons or turn the [ ] dial), and
then press the [ ] button.