Customizing the self-timer, Continuous shooting, 43), and when – Canon PowerShot SX720 HS User Manual

Page 43

Advertising
background image

43

Before Use

Basic Guide

Advanced Guide

Index

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Continuous Shooting

Still Images

Movies

In [

] mode, hold the shutter button all the way down to shoot

continuously.

For details on the continuous shooting speed, see “Camera” (= 177).

1

Configure the setting.

Press the [ ] button, choose [ ] in the

menu, and then choose [ ] (= 28).

Once the setting is complete, [ ] is

displayed.

2

Shoot.

Hold the shutter button all the way down

to shoot continuously.

During continuous shooting, the focus, exposure, and colors are
locked at the position/level determined when you pressed the
shutter button halfway.

Cannot be used with the self-timer (= 42).

Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.

As more shots are taken, shooting may slow down.

Shooting may slow down if the flash fires.

Multi-area White Balance (= 50) is not available. Similarly,
[Hg Lamp Corr.] (= 50) is set to [Off] and cannot be changed.

Customizing the Self-Timer

Still Images

Movies

You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).

1

Choose [ ].

Following step 1 in “Using the Self-Timer”

(= 42), choose [ ] and press the

[

] button.

2

Configure the setting.

Press the [ ][ ] buttons to choose the

delay time or number of shots.

Press the [ ][ ] buttons or turn the [ ]

dial to choose a value, and then press the

[ ] button.

Once the setting is complete, [ ] is

displayed.

Follow step 2 in “Using the Self-Timer”

(= 42) to shoot.

For movies recorded using the self-timer, recording begins after
your specified delay time, but specifying the number of shots has
no effect.

When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified
to take many shots. Shooting will stop automatically when the
memory card becomes full.

When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)

Advertising
This manual is related to the following products: