Canon PowerShot SX720 HS User Manual

Page 64

Advertising
background image

64

Before Use

Basic Guide

Advanced Guide

Index

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

3

Press the shutter button all the way

down.

The camera now enters shooting standby

mode, and [Wink to take picture] is

displayed.

The lamp blinks and the self-timer sound

is played.

4

Face the camera and wink.

The camera will shoot about two seconds

after detecting a wink by the person

whose face is inside the frame.

To cancel shooting after you have

triggered the self-timer, press the

[

] button.

If the wink is not detected, wink again slowly and deliberately.

Winking may not be detected if eyes are obscured by hair, a hat,
or glasses.

Closing and opening both eyes at once will also be detected as
a wink.

If winking is not detected, the camera will shoot about 15 seconds
later.

To change the number of shots, press the [ ][ ] buttons after
choosing [ ] in step 1.

If no one is in the shooting area when the shutter button is
pressed all the way down, the camera will shoot after a person
enters the shooting area and winks.

The zoom factor cannot be changed with the [

] button after you

press the shutter button all the way down.

Switch to another mode when you finish shooting, or the camera
will continue shooting each time a smile is detected.

You can also shoot as usual by pressing the shutter button.

The camera can detect smiles more easily when subjects face
the camera and open their mouth wide enough so that teeth
are visible.

To change the number of shots, press the [ ][ ] buttons after
choosing [

] in step 1.

Automatic shooting is not available while you are holding down
the [

] button.

Auto Shooting after Wink Detection (Wink Self-Timer)

Still Images

Movies

Aim the camera at a person and press the shutter button all the way

down. The camera will shoot about two seconds after a wink is detected.

1

Choose [ ].

Follow steps 1 – 2 in “Specific Scenes”

(= 59) and choose [ ], and then

press the [

] button.

Press the [ ][ ] buttons or turn the [ ]

dial to choose [ ], and then press the

[

] button.

2

Compose the shot and press the

shutter button halfway.

Make sure a green frame is displayed

around the face of the person who will

wink.

Advertising
This manual is related to the following products: