Using another access point – Canon PowerShot G3 X User Manual
Page 139
139
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Using Another Access Point
When connecting the camera to a smartphone with the [ ] button or
through the Wi-Fi menu, you can also use an existing access point.
1
Prepare for the connection.
z
Access the [Waiting to connect] screen
by either following steps 1 – 3 in “Sending
to a Smartphone Assigned to the Button”
(= 136) or steps 1 – 4 in “Adding a
Smartphone Using the Wi-Fi Menu”
2
Connect the smartphone to the
access point.
3
Choose [Switch Network].
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Switch Network], and then
press the [ ] button.
z
A list of detected access points will be
displayed.
4
Connect to the access point and
choose the smartphone.
z
For WPS-compatible access points,
connect to the access point and choose
the smartphone as described in steps
5 – 8 in “Using WPS-Compatible Access
z
For non-WPS access points, follow steps
2 – 4 in “Connecting to Listed Access
Points” (= 144) to connect to the
access point and choose the smartphone.
●
All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 5. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 5.
●
Once you have registered a smartphone, you can change privacy
settings for it on the camera (= 157).
●
Connections require that a memory card be in the camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
(= 31) ► [ 4] tab ► [Wi-Fi Settings] ► [Target History] ►
[Off].
●
You can also send multiple images at once and change the image
size before sending (= 151).