Canon PowerShot G3 X - Manual (Page 170)

170
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Powering the Camera with Household Power
Still Images Movies
Powering the camera with AC Adapter Kit ACK-DC80 (sold separately)
eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Open the cover.
z Follow step 1 in “Inserting the Battery
Pack and Your Memory Card” (= 20)
to open the memory card/battery cover,
and then open the coupler cable port
cover as shown.
3
Connect the adapter to the coupler.
z Insert the adapter plug fully into the
coupler.
4
Insert the coupler.
z Insert the coupler as shown until it locks
into place.
(1)
(2)
3
Turn the TV on and switch to
external input.
z Switch the TV input to the external input
you connected the cable to in step 2.
4
Turn the camera on.
z Press the [ ] button to turn the camera
on.
z Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
z When finished, turn off the camera and
TV before disconnecting the cable.
● Touch-screen operations are not supported while the camera is
connected to a television.
● Some information may not be displayed when viewing images on
a TV (= 194).
● Camera operating sounds are not played while the camera is
connected to an HDTV.
● When the camera and TV are connected, you can also shoot
while previewing shots on the larger screen of the TV. To shoot,
follow the same steps as when using the camera screen.
However, AF-Point Zoom (= 55), MF-Point Zoom (= 86),
MF Peaking (= 88) and Night Display (= 161) are not
available.