Canon PowerShot G3 X - Manual (Page 58)

58
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold] (= 58).
2
Configure the setting.
z Choose [Display Info], and then choose
the desired option (= 31).
z To restore the original setting, repeat this
process but choose [Off].
Off Displays only the image.
Detailed Displays shooting details (= 194).
● When [Display Time] (= 58) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
● By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] are not changed. You can also erase
images by pressing the [ ] button.
Changing the Image Display Style after Shots
Still Images Movies
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image after
shooting] screen.
z Press the [ ] button, choose
[Review image after shooting] on the
[ 2] tab, and then press the [ ] button
(= 31).
2
Configure the setting.
z Choose [Display Time], and then choose
the desired option (= 31).
z To restore the original setting, repeat this
process but choose [Quick].
Quick Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec.
Displays images for the specified time. Even while
the shot is displayed, you can take another shot by
pressing the shutter button halfway again.
Hold
Displays images until you press the shutter button
halfway.
Off No image display after shots.