Canon EOS M10 - Manual (Page 118)

118
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
● Connections require that a memory card be in the camera.
● You can also change the camera nickname on the screen in
step 2 (= 137).
● To connect without entering a password in step 5, choose MENU
(= 32) > [ 4] tab > [Wi-Fi Settings] > [Password] > [Off].
[Password] is no longer displayed on the SSID screen (in step 4).
● Once you have connected to devices, recent destinations will
be listed first when you access the Wi-Fi menu. You can easily
connect again by pressing the [ ][ ] buttons to choose the
device and then pressing the [ ] button. To add a new device,
display the device selection screen by pressing the [ ][ ]
buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
(= 32) > [ 4] tab > [Wi-Fi Settings] > [Target History] > [Off].
Using Another Access Point
When connecting the camera to a smartphone with the [ ] button or
through the Wi-Fi menu, you can also use an existing access point.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Wi-Fi (Wireless LAN)” (= 188).
Connection methods vary depending on whether the access point
supports Wi-Fi Protected Setup (WPS, = 119) or not (= 120). For
non-WPS access points, check the following information.
● Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called the
“access point name” or “network name”.
8
Adjust the privacy setting.
● When this screen is displayed, press the
[ ][ ] buttons to choose [All images],
and then press the [ ] button.
● This screen is no longer displayed about
a minute after the devices have been
connected.
9
Import images.
● Use the smartphone to import images
from the camera to the smartphone.
● When shooting remotely, choose [All images] in step 8.
● All images in the camera can be viewed from the connected
smartphone when you choose [All images] in step 8. To restrict
camera images that can be viewed from the smartphone, choose
a different option in step 8 (= 136). Once you have registered a
smartphone, you can change privacy settings for it on the camera
(= 136).