Connecting to listed access points, 120). for – Canon EOS M10 User Manual
Page 120
120
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Connecting to Listed Access Points
1
View the listed access points.
●
View the listed networks (access points)
as described in steps 1 – 3 of “Using
2
Choose an access point.
●
Press the [ ][ ] buttons to choose a
network (access point), and then press
the [ ] button.
3
Enter the access point password.
●
Press the [ ] button to access the
keyboard, and then enter the password
●
Press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
4
Choose [Auto].
●
Press the [ ][ ] buttons to choose
[Auto], and then press the [ ] button.
5
Import images.
●
Follow steps 6 – 9 in “Adding a
Smartphone Using the Wi-Fi Menu”
(= 117) to choose the smartphone,
adjust the privacy setting, and import the
images.
6
Establish the connection.
●
On the access point, hold down the WPS
connection button for a few seconds.
●
On the camera, press the [ ] button to
go to the next step.
7
Import images.
●
Follow steps 6 – 9 in “Adding a
Smartphone Using the Wi-Fi Menu”
(= 117) to choose the smartphone,
adjust the privacy setting, and import the
images.
●
If you chose [PIN Method] in step 5, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.