Preparing the computer, Sending images – Canon EOS M10 User Manual
Page 132
132
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
●
A list of cameras linked to CANON
iMAGE GATEWAY is displayed. Choose
the camera from which images are to be
sent.
●
Once the camera is registered and the
computer is ready to receive images, the
icon changes to [ ].
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer
and save the images.
1
Send images.
●
Follow steps 1 – 2 in “Uploading Images
to Web Services” (= 124) and choose
[ ].
●
Once the connection is established,
the images are sent. When the images
have been sent successfully to the
CANON iMAGE GATEWAY server, [ ] is
displayed on the screen.
2
Save the images to the computer.
●
Images are automatically saved to the
computer when you turn it on.
●
Sent images are labeled with a [ ] icon.
●
Press the [ ][ ] buttons to choose
[Image Sync], and then choose [Stills/
3
Assign [ ] to the [ ] button (only
when sending images by pressing
the [ ] button).
●
Clear the [ ] button setting if a
smartphone is already assigned to the
button (= 115).
●
Press the [ ] button to access the
mobile connection screen, choose [ ]
by pressing the [ ][ ] buttons, and then
press the [ ] button.
Preparing the Computer
Install and configure the software on the destination computer.
1
Install Image Transfer Utility.
●
Install Image Transfer Utility on a
computer connected to the Internet
●
Image Transfer Utility can also be
downloaded from the Image Sync
settings page of CANON iMAGE
GATEWAY (= 131).
2
Register the camera.
●
Windows: In the taskbar, right-click [ ],
and then click [Add new camera].
●
Mac OS: In the menu bar, click [ ], and
then click [Add new camera].