Canon EOS 1D X Mark II - Manual (Page 90)

90
Responding to Error Messages
What to check on the DHCP server
Is the power of the DHCP server on?
X Turn on the DHCP server.
Are there enough addresses for assignment by the DHCP
server?
X Increase the number of addresses assigned by the DHCP server.
X Remove devices assigned addresses by the DHCP server from
the network to reduce the number of addresses in use.
Is the DHCP server working correctly?
X Check the DHCP server settings to make sure it is working
correctly as a DHCP server.
X If applicable, ask your network administrator to ensure the DHCP
server is available.
What to check on the network as a whole
Does your network include a router or similar device that
serves as a gateway?
X If applicable, ask your network administrator for the network
gateway address and enter it on the camera (p.101, 106).
X Make sure that the gateway address setting is correctly entered on
all network devices, including the camera.